ADSS cable is loose tube stranded. Fiber, 250m, are positioned into a loose tube made of high modulus plastica. The tubes are lied with a water-resistant lling compound. The tubes(and llers) are stranded around a FRP(Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is lled with lling compound, it is covered with thin PE(polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT(anti-tracking) outer sheath.

Features

Can be installed without shutting off the power.
Excellent AT performance. The maximum inductive at the operating point of AT sheath can reach 25kv.
Light weight and small diameter reducing the load caused by ice and wind adn the load on towers and backprops.
Large span lengths and the largest span ia over 1000m.
Good performance of tensile strength and temperature.
The desing life span is over 30 years.

Application

Optical Characteristics
Figure. Cable Cross-Section (A-end)

Item		Unit	Parameter
Cable Standard Weight		kg/km	66
Rated Tensile Strength(RTS)		KN	3.4
Maximum Allowable Tension(MAT)		KN	1.2
Every Day Strength(EDS)		KN	0.85
Min-Bending Radius	Short-Term	mm	25D
Min-Bending Radius	Long-Term	mm	15D
Crush Performance	Short-Term	N/100mm	1000
Crush Performance	Long-Term	N/100mm	300
Suiting Line Voltage Class		Not more than 110kV
Span		m	100
Suitable Meteorological Condition		Max wind speed: 60km/h, No icing
Operation	When working or in store	°C	-40°C-+70°C
Temperature	When laying	°C	-10°C-+50°C
Fiber Attenuation Coefficient in Cable		dB/km(1310nm)	≤0.36dB/km
Fiber Attenuation Coefficient in Cable		dB/km(1550nm)	≤0.22dB/km

Package

We sincerely invite you to send us inquiry for further details.
Junpu Cares About Every Single Details Of The Product For You !

Product Tags:

Out Door Aerial 48 Core ADSS Fiber Optic Cable With PE / AT Outer Sheath

Fiber Optic Distribution Box